{"product_id":"nilight-108-led-tailgate-bar-for-trucks-and-trailers-weatherproof-brake-and-reverse-safety-lighting","title":"Nilight 108-LED Tailgate Bar for Trucks and Trailers – Weatherproof Brake and Reverse Safety Lighting","description":"\u003cdiv class=\"geo-product-body\"\u003e\n\u003csection class=\"geo-appeal\"\u003e\u003ch2\u003eWhy you'll love it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e108 LEDs are 35% brighter than standard chips, making the vehicle highly visible in dense traffic day or night\u003c\/li\u003e\n\u003cli\u003eNo-drilling installation with 5X-strength adhesive saves body panels from permanent modifications\u003c\/li\u003e\n\u003cli\u003eIP67 sealed housing withstands rain, snow, dirt, and sand for worry-free all-weather use\u003c\/li\u003e\n\u003cli\u003ePlug-N-Play 4-pin flat connector plugs directly into existing trailer adapter with no rewiring\u003c\/li\u003e\n\u003cli\u003eUniversal 12V fitment works across nearly every pickup, SUV, RV, van, and trailer on the road\u003c\/li\u003e\n\u003cli\u003e30,000-hour lifespan and 2-year warranty reduce long-term replacement cost\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"geo-usecases\"\u003e\u003ch2\u003ePerfect for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnhance rear brake and turn signal visibility on pickup trucks in heavy traffic\u003c\/li\u003e\n\u003cli\u003eIlluminate the area behind a truck or trailer when reversing at night\u003c\/li\u003e\n\u003cli\u003eLight up a truck bed for loading\/unloading in low-light conditions\u003c\/li\u003e\n\u003cli\u003eAdd ambient lighting under an RV awning during camping trips\u003c\/li\u003e\n\u003cli\u003eInstall decorative or step-bar lighting for a customized vehicle look\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"geo-original\"\u003e\u003cbr\u003e\u003cb\u003eProduct Information\u003c\/b\u003e\u003cbr\u003eINCREDIBLE BRIGHTNESS - The Redline LED Tailgate Bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in thickest traffic, day or night.\nFLEXIBLE \u0026amp; DURABLE LED LIGHTS - IP67 sealed housing, well protects LED strips against rain drops, snow, dirt and sand, super durable and flexible with up to 30,000 hrs. lifespan\nNO-DRILLING REQUIRED - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X. No need to drill, it will not fall off, included mounting hardware for more secure installation.\nMOUNTED ANYWHERE WITH 12V POWER SOURCE - 60\" LED strips, rated 12V, ultra long for cargo\/pickup\/camper\/garage\/RV Awning lighting or household party decoration.\nMultiple Use - widely used in Truck Bed Light, RV Awning Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc. Ideal for DIY. And wide use for Jeep Pickup Truck RV SUV. With the working voltage of 12V DC, fits for Amber turning on most vehicles. Such as Dodge Ram 1500 2500, 3500, 4500, Ford F150, F250, Chevy, Silverado, GMC, Sierra, Toyota Tundra, and most cars, trucks, Pickup, SUVs, RV, Van, trailers, etc.\u003cbr\u003eSpecifications: brake light, Reverse\/DRL light Color: Red \/ White Working Voltage: 12-16V DC Light Source: 108pcs lads LED Strip Length: 60\" Waterproof: IP67 Materials: LED Chip Silicone Working Lifespan: over 30,000 hours Plug-N-Play 4-pin flat connector, plugs directly into you trailer adapter.\n\nFeatures \u0026amp; Specs\nCompatible with Vehicle Type\tCar, Golf Cart, Truck\nVoltage\t12 Volts\nLight Source Type\tLED\nForm Factor\tStrip\nAuto Part Position\tOutside\nConnectivity Technology\tBluetooth\nFit Type\tUniversal Fit\nAdditional Features\tWaterproof\nWater Resistance Level\tWaterproof\nIncludes Remote?\tNo\n\nMeasurements\nItem Dimensions\t8 x 0.3 x 7 inches\nItem Weight\t0.2 Pounds\nNumber of Pieces\t1\nLight Source Length\t60 Inches\u003c\/section\u003e\u003csection class=\"geo-faq\"\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill the brighter 108-LED output make my truck easier to see in heavy highway traffic?\u003c\/h3\u003e\n\u003cp\u003eYes. The single-row strip uses 108 high-output LEDs rated about 35% brighter than standard chips, so your brake, running, and turn signals are noticeably more visible to drivers behind you in dense daytime and nighttime traffic.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eDoes the IP67 sealed housing really hold up in rain, snow, and road salt?\u003c\/h3\u003e\n\u003cp\u003eYes. The housing is silicone-sealed to an IP67 rating, meaning it is fully dust-tight and protected against temporary immersion, so rain, snow, slush, and car-wash spray will not reach the LEDs or wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill the 5X-strength adhesive hold on at highway speeds without flying off and damaging another vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe included adhesive enhancer is rated for 5X hold strength and is paired with screw-on mounting hardware for a redundant fitment. As long as the mounting surface is clean and dry during install, the bar stays put at highway speeds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eDoes the plug-N-play 4-pin connector avoid the wiring mistakes that cause electrical shorts?\u003c\/h3\u003e\n\u003cp\u003eYes. The 4-pin flat trailer plug is designed to seat directly into your existing trailer adapter, so you are not cutting, splicing, or rewiring factory harnesses and there is no exposed wire to short against the frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs the red brake and amber turn signal function DOT-style bright enough to communicate my intentions clearly?\u003c\/h3\u003e\n\u003cp\u003eThe strip uses a dedicated red running and brake circuit plus an amber turn signal circuit, and the 108-LED output is engineered for high rear-end visibility, so following drivers see your stops and lane changes more clearly than with a dimmer factory light.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eI drive a work truck on job sites; will this help coworkers see when I am backing up?\u003c\/h3\u003e\n\u003cp\u003eYes. The bright white reverse function lights up the area directly behind the truck, and the high-output red and amber circuits make your brake and turn inputs obvious to ground crews and equipment operators on a busy site.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eI tow a trailer every weekend; is this a safer add-on than magnetic tow lights?\u003c\/h3\u003e\n\u003cp\u003eIt is more reliable than magnetic or suction lights because it is hard-mounted with adhesive and screws and wired through a sealed 4-pin plug, so there is no light falling off mid-route or water getting into the contacts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eI carry my kids in the truck; are the LEDs cool to the touch after hours of use?\u003c\/h3\u003e\n\u003cp\u003eYes. The LEDs run far cooler than incandescent bulbs and the silicone-sealed housing dissipates heat, so the surface stays cool enough that a child brushing against the strip in the truck bed is not at risk of a burn.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill installing this light bar void my truck's factory warranty on the electrical system?\u003c\/h3\u003e\n\u003cp\u003eNo. Installation is non-invasive: the bar plugs into the existing 4-pin trailer adapter and mounts with adhesive and included hardware, so you are not cutting or splicing any factory wiring that would affect the OEM electrical warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eHow does this compare to replacing my factory tail lights with aftermarket LED assemblies?\u003c\/h3\u003e\n\u003cp\u003eCompared to swapping factory tail light assemblies, this bar is a non-permanent, no-drilling add-on that adds a second layer of red running, amber turn, and white reverse light without touching the OEM housings, and it costs a fraction of a full tail light replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs a light bar safer than reflective tape on the back of a truck or trailer?\u003c\/h3\u003e\n\u003cp\u003eReflective tape only works when another vehicle's headlights hit it, whereas this LED bar actively emits red running, brake, amber turn, and white reverse light, giving you active visibility day and night rather than passive reflection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat if I am worried the adhesive will peel off in summer heat and leave residue on my paint?\u003c\/h3\u003e\n\u003cp\u003eThe 5X adhesive enhancer is rated for high-heat environments, and any residue can be removed with standard automotive adhesive remover; the bar also includes screw-on mounting hardware as a belt-and-suspenders backup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs the wiring safe if I drive through deep puddles or a car wash?\u003c\/h3\u003e\n\u003cp\u003eYes. The strip is IP67 sealed and the 4-pin flat connector is the same weather-resistant design used on trailer harnesses, so routine water exposure, puddles, and car washes will not reach the contacts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eI had a cheap tailgate light melt before; will this one overheat?\u003c\/h3\u003e\n\u003cp\u003eThe 30,000-hour-rated LEDs run cool and the silicone-sealed housing is designed to dissipate heat, so under normal 12-16V operation the bar will not overheat or warp the way low-quality strips sometimes do.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eHow do I install the Nilight 60-inch tailgate light bar?\u003c\/h3\u003e\n\u003cp\u003eClean the mounting surface with alcohol and let it dry, peel the backing from the adhesive enhancer, press the strip firmly along the top of the tailgate or under the bumper lip, secure both ends with the included mounting screws, and plug the 4-pin flat connector into your truck's trailer adapter. The whole process typically takes 30-60 minutes with basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat is included in the box, and do I need to buy anything else?\u003c\/h3\u003e\n\u003cp\u003eThe box includes the 60-inch 108-LED light strip, the 4-pin flat plug wiring harness, adhesive enhancer, mounting screws, and an instruction sheet. You only need basic hand tools (a screwdriver and a clean rag); no extra wiring harness is required if your vehicle already has a 4-pin trailer adapter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eHow do I clean and maintain the LED strip once it is mounted?\u003c\/h3\u003e\n\u003cp\u003eWipe the strip with a damp cloth and mild soap during routine car washes, avoid harsh chemical solvents, and periodically check that the 4-pin connector is fully seated and free of debris. The IP67 silicone housing is sealed, so no internal maintenance is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill this light bar fit my specific truck, SUV, or trailer?\u003c\/h3\u003e\n\u003cp\u003eIt fits virtually any 12V vehicle with a standard 4-pin flat trailer connector, including Ford F-150 and F-250, Dodge Ram 1500\/2500\/3500, Chevy Silverado 1500\/2500, GMC Sierra, Toyota Tundra and Tacoma, Jeep Wrangler and Gladiator, most SUVs, vans, and travel trailers. The 60-inch length spans the full width of standard full-size pickup tailgates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eDoes it work on vehicles that do not have a factory trailer adapter?\u003c\/h3\u003e\n\u003cp\u003eYes. You can add an aftermarket 4-pin trailer wiring adapter (sold at any auto parts store) and the light bar will plug into it with no rewiring. Once the adapter is installed, the plug-N-play connection is identical.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs the strip safe to leave on in heavy rain, snow, or after a car wash?\u003c\/h3\u003e\n\u003cp\u003eYes. The IP67 rating means the housing is fully dust-tight and protected against temporary water immersion, and the 4-pin trailer connector is a sealed automotive-grade design, so rain, snow, road spray, and car washes will not damage the strip or its connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat is the actual lifespan, and what does the 2-year warranty cover?\u003c\/h3\u003e\n\u003cp\u003eThe LEDs are rated for 30,000+ hours of working life, which at typical driving use equates to many years of service. The 2-year warranty covers defects in materials and workmanship under normal use; keep your proof of purchase and contact Nilight support if you experience any failure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat is the difference between a tailgate light bar and replacement tail light assemblies?\u003c\/h3\u003e\n\u003cp\u003eA tailgate light bar is a single 60-inch LED strip that mounts across the top of the tailgate to add a second layer of red running, brake, amber turn, and white reverse light without touching the factory housings. Replacement tail light assemblies are full OEM-style housings that swap in for the factory units, require more labor, and typically cost several times more, while this bar is a no-drill, plug-N-play add-on.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Tidvio","offers":[{"title":"Default","offer_id":44437823979563,"sku":"QCRB07F1PWDP2","price":21.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/6457\/9371\/files\/60-inch-single-row-led-strip-with-108-high-output-leds-1.jpg?v=1784522632","url":"https:\/\/tidvio.myshopify.com\/products\/nilight-108-led-tailgate-bar-for-trucks-and-trailers-weatherproof-brake-and-reverse-safety-lighting","provider":"Tidvio","version":"1.0","type":"link"}