Command Cord Bundlers – Pet and Kid Friendly Wire Management for Living Room and Bedroom, No-Drill Adhesive
Command Cord Bundlers – Pet and Kid Friendly Wire Management for Living Room and Bedroom, No-Drill Adhesive
Couldn't load pickup availability
Why you'll love it
- Leaves no holes, marks, or sticky residue—safe for renters and freshly painted walls
- No tools required, making installation quick and accessible to anyone
- Reusable with inexpensive refill strips, lowering long-term cost
- Eliminates tripping hazards and tangled cord clutter near electronics
- Cleanly removes when redecorating, so the layout can evolve with the room
Perfect for
- Tame tangled computer and monitor cables behind a home office desk
- Route TV, gaming console, and soundbar cords along a wall without drilling
- Organize phone and lightning charging cables on a nightstand or kitchen counter
- Hold appliance cords (kitchen, vacuums) off the floor for a cleaner look
- Reorganize cable layout in a dorm room without violating no-damage lease rules
Organize cords and keep them out of sight with these damage-free hooks and clips. Available in plenty of sizes and styles so you can bundle your cord mess with ease.
Product Information
INCLUDES - 6 white bundlers, 12 medium strips DAMAGE FREE HANGING: Wall cord hider works without leaving holes, marks or sticky residue on a variety of surfaces and removes cleanly when you want to reorganize your electrical cables and lightning cables without tools WORKS ON A VARIETY OF SMOOTH SURFACES: Each Command Cord Bundler works on a variety of smooth surfaces, including painted walls, finished wood, painted concrete cinder blocks, laminate, glass, metal and tiles SURFACE PREP: Clean with rubbing alcohol to remove grime and dust to allow the cord organizers to bond to the surface; the indoor temperature must be between 50 degrees Fahrenheit and 105 degrees Fahrenheit USAGE TIPS: Wait seven days after painting before using the Command Cord Bundlers to allow paint to cure; do not hang over beds or on wallpaper; do not use the cord holders for hanging valuable items EASY CLEAN REMOVAL: Lightly hold the top of the wall adhesive strips and slowly pull straight down towards the floor to remove the cord wrap and prevent damage of walls and surfaces; reuse your electrical cord organizer with medium refill strips DAMAGE FREE HANGING: Bundlers work without leaving holes, marks or sticky residue on a variety of surfaces and remove cleanly when you want to reorganize your space without tools REUSE WITH REPLACEMENT STRIPS: Reuse your electrical cord organizer and hardware again by purchasing Command Refill Strips
Command White Cord Bundlers eliminate dangerous, tangled cords behind your computers, appliances and entertainment centers without damaging your walls and surfaces. A great home improvement item, this damage free hanging cable cord hider sticks on a variety of smooth surfaces without leaving holes, marks or sticky residue. Simply mount these cord holders on painted walls, finished wood, painted concrete cinder blocks, laminate, glass, metal and tiles to optimize cable management. Perfect for home renovators and college students, use these wall hangers in your work office, home office and entertainment areas to elevate the appearance of your living or working space by holding lightning cables other electrical cables off the floor without tools. Directions are included; follow the directions closely to use the electrical cord organizer as intended. Apply medium Command Refill Strips to relocate the 3M Cord Bundlers to a new area. A clever organizing solution that doesn’t damage surfaces, this cord organizer for appliances will help you organize your space. Each package contains six white bundlers and 12 medium Command Strips. One cord bundler will hold up to two pounds. Decorate, organize and celebrate damage free with Command.
Frequently Asked Questions
Will mounting cords to the wall actually reduce trip hazards?
Yes. Cables that run flat along a wall or baseboard are far less likely to catch a foot than cords that drape across open floor space, especially in hallways and entryways.
Is the adhesive strong enough to hold a thick power cable if it's tugged?
The bundler is rated to hold up to two pounds of cable weight. A tug from foot traffic can exceed that on heavy cables, so route them along a baseboard and out of walking paths whenever possible.
Will this help keep my pet from chewing loose cables?
Mounting cables flat against the wall removes the loose, dangling end that pets target. Combine with bitter-deterrent spray for extra protection on persistent chewers.
Is it safe to use on a wall near a crib or toddler bed?
The bundler itself has no sharp edges and sits flush, but for a child's room the bigger safety win is keeping cables off the floor and crib, which is exactly what wall-mounting accomplishes.
Does the adhesive give off any fumes indoors?
The strips are designed for interior use without strong odor. As with any adhesive product, applying it in a ventilated room is a sensible precaution.
Is this a safer way to manage cables than taping them to the floor?
Yes. Floor tape loses adhesion, gets wet, and curls at the edges, becoming its own trip hazard. Wall-mounted bundlers lift the cable off the floor entirely and stay put.
Are cord bundlers safer than leaving cables under a rug?
Rugs can trap heat around cables and hide damage. Routing cables along a wall keeps them visible, ventilated, and easy to inspect.
How does this compare to cable protectors and floor cord covers?
Floor covers still leave a ramp on the walking surface, which is a trip risk in itself. Wall-mounted routing removes the cable from foot traffic altogether, which is the safer long-term approach.
Is the strip itself a hazard if a child pulls at it?
On a properly prepared surface, the strip is designed to release under sustained pull rather than tear the wall. The stretch-release removal method is built around this same principle.
Will these hold up in a kitchen with steam and temperature swings?
The adhesive is rated for normal interior conditions. For a backsplash area with direct heat or heavy steam, mount the bundler on a nearby dry section of wall instead.
What if a strip fails and my cable falls behind furniture?
If a strip loosens, replace it with a fresh medium strip before remounting. Check the bond every few months, especially in kitchens, bathrooms, or anywhere humidity shifts.
Can I trust the weight rating on the package?
The two-pound rating is for static cable weight on a clean, smooth interior surface, applied as directed. Heavy power bricks and transformers should be supported by the outlet or a separate mount.
Will the strips damage a freshly painted wall if I have to remove them fast?
Use the slow stretch-release method, pulling the strip straight down parallel to the wall rather than yanking it off at an angle. This is what protects the paint when speed matters.
How do I install the cord bundlers so they actually hold?
Wipe the wall with isopropyl alcohol and let it dry, separate the strips, press one onto the back of the bundler, remove the liner, press the bundler firmly to the wall for about 30 seconds, wait an hour before loading any cable, and then snap the cable into the bundler.
How do I remove a strip without damaging the wall?
Grab the tab at the bottom of the strip and pull it slowly straight down, parallel to the wall, stretching the adhesive until it releases. Don't pull the strip toward you or at an angle, since that is what causes paint to lift.
Can I reuse the same bundler in a new location?
Yes. The bundler itself is reusable. To move it, remove the old strip with the stretch-release method, attach a fresh medium Command refill strip, and remount the bundler to the new surface.
Do these work on painted drywall, wood, glass, metal, and tile?
Yes, the strips are designed for smooth, finished interior surfaces including painted drywall, finished wood, laminate, glass, metal, and tile. They are not intended for heavy texture, brick, stone veneer, or outdoor surfaces.
Are the strips compatible with other Command medium products?
Yes. The bundlers use standard medium Command strips, so any medium refill pack from the same product line will work for repositioning or adding more bundlers.
What's in the box and what do I need to buy separately?
The package includes six cord bundlers and twelve medium adhesive strips, which is two strips per bundler. No tools or extra supplies are required, and you only need to buy refill strips if you plan to remount the bundlers multiple times.
Will the strips leave sticky residue on my wall?
When removed using the stretch-release method, the strips are designed to lift off without leaving adhesive residue. If a small amount of stickiness remains, it usually wipes off with a little isopropyl alcohol on a soft cloth.
What is the weight limit per bundler?
Each bundler holds up to two pounds of cable weight on a properly prepared, smooth interior surface. Avoid mounting a heavy power adapter or transformer from a single bundler, since the rating is for cable weight, not brick weight.
What's the difference between cord clips, cord bundlers, and cable sleeves?
Cord clips anchor a single cable at one point on a surface, cord bundlers are larger versions designed to hold thicker cable bundles flush to a surface, and cable sleeves group multiple cables into one flexible tube that sits loose on the floor or behind furniture.
