DrainKey Powder-Coated Drain Wrench for Clutter-Free Toolbox
DrainKey Powder-Coated Drain Wrench for Clutter-Free Toolbox
Couldn't load pickup availability
Why you'll love it
- Won't scratch or mar the bathtub surface during use
- Dual-ended design fits two common drain sizes with one tool
- Heavy-duty die-cast aluminum resists bending under torque
- Rust-proof construction holds up in wet bathroom environments
- Works with tools most homeowners already own (adjustable wrench or screwdriver)
- Compact 6-inch size fits easily in a standard toolbox drawer
Perfect for
- Removing a stuck or corroded tub drain for replacement
- Installing a new tub drain or spud during bathroom renovation
- Loosening old tub drains to clear clogs or hair buildup
- Routine bathroom maintenance between tenant turnovers
- Replacing worn drain hardware to stop slow leaks
How to use tub drain wrench
1
Select correct end of tool for the tub drain
The small end of the wrench is used for 1 3/8" and 1 1/2" bath tub drains
2
Insert the tool into the drain
3
- Insert screwdriver into the tool or use an adjustable wrench to turn
- Turn counterclockwise to remove the drain
- Turn clockwise to tighten the drain
4
Job done
Detailed size information for tub drain remover tool
The small end fits 1 3/8" and 1 1/2" tub drain
The following types of drain may not fit, please make sure your drain size is applicable before purchasing
Product Information
Fits most 1 3/8" and 1 1/2" tub drains, if your drain cross bar is badly corroded, it may not be suitable, then you possiblely need a tub drain extractor Better used combination with adjustable wrench or screwdriver Suitable to be used to install and remove tub drains and spuds, your helpful plumbing tool kit Heavy duty die-cast aluminum construction, rust free & won't scratch the bathtub surface Dual ended tub drain remover tool Product dimensions: the small end's diameter is Φ1.3 ''/3.3cm and large end's diameter is Φ1.42''/3.6cm and Φ1.54''/3.9cm, respectively. Contact us with any questions or concerns Instructions for use: 1, select correct end of tool for the tub drain, and the small end of the wrench is used for bath tub drains. 2, insert the tool into the drain. 3, insert screwdriver into the tool or adjustable wrench around body of the tool. 4, turn counterclockwise to remove the drain; turn clockwise to tighten the drain NOTE: The tool fits most 1 3/8" and 1 1/2" tub drains. But the following types of drain will not work correctly: 1,the metal disk in the middle of drain is too big; 2, the crossbar is badly corroded; 3, three prongs drain not four. Please check the product specifications and descriptions below carefully before purchasing
Color Silver Brand BearHut Material Die-cast Aluminum Item Length 6 Inches Item Weight 8.6 Ounces Item Package Quantity 1 Finish Type Powder Coated Manufacturer BearHut Part Number BHTDRW0117 Item Weight 8.6 ounces Item model number BHTDRW0117 Style Durable Finish Powder Coated Batteries Included? No Batteries Required? No
Frequently Asked Questions
Can one tool really replace several drain wrenches in my toolbox?
Yes. The DrainKey combines the two most common drain sizes into a single dumbbell-shaped tool, eliminating the need for multiple specialty wrenches.
Is the design simple enough to use without instructions?
Yes. Insert the matching end into the drain, insert a screwdriver or adjustable wrench into the cross-bar slot, and turn. The learning curve is minimal.
Will the neutral silver finish blend in with my other workshop tools?
Yes. The powder-coated silver finish is understated and matches the look of most standard hand tools, keeping your kit visually cohesive.
Does the tool feel bulky or over-engineered for the job?
No. The 6-inch length and 8.6-ounce weight make it light and compact, designed specifically for straightforward single-task use.
Can I store this without adding clutter to a small maintenance closet?
Yes. Its compact size fits inside a standard toolbox drawer or a small parts bin, making it ideal for tight storage in apartments and rental units.
How do I use the DrainKey tub drain remover to remove a stuck drain?
Insert the correct end of the DrainKey (1.3-inch or 1.42/1.54-inch) into the drain opening. Place a screwdriver or adjustable wrench through the cross-bar slot, then turn counterclockwise to loosen the drain.
How do I install a new tub drain with this tool?
After threading the new drain or spud into the drain opening by hand, insert the matching DrainKey end and use the cross-bar slot with a screwdriver or adjustable wrench to tighten it securely.
What is the step-by-step process for clearing a clogged tub drain with this wrench?
First, remove the drain stopper or strainer. Insert the matching DrainKey end into the drain, engage the cross-bar slot with a screwdriver or adjustable wrench, and turn counterclockwise to lift out the drain. Clear the hair or debris, then reinstall.
Does the DrainKey fit all standard tub drains?
It fits the two most common North American tub drain sizes: 1 3/8 inch and 1 1/2 inch. Drains outside these dimensions will require a different tool.
Is the DrainKey compatible with my cordless drill or impact driver?
The DrainKey is designed for hand tools. We recommend using a screwdriver or adjustable wrench to maintain controlled torque and avoid damaging the drain or tub surface.
What is included in the box when I order the DrainKey?
You receive one DrainKey dual-ended tub drain remover wrench. No additional parts or accessories are required; you supply your own screwdriver or adjustable wrench.
Will the aluminum body rust if I leave it in a damp bathroom or truck?
No. The die-cast aluminum body is finished with a rust-proof powder coat, so it holds up well in humid bathroom environments and service vehicle storage.
Can the DrainKey bend if the drain is severely corroded?
The heavy-duty die-cast aluminum is built to resist bending under normal torque. For drains seized by decades of corrosion, apply penetrating oil first and let it soak before applying force.
What is the difference between a tub drain remover wrench and a sink drain wrench?
Tub drain removers like the DrainKey are sized and shaped for the larger 1 3/8-inch and 1 1/2-inch tub drain crossbars, while sink drain wreners are smaller and designed for kitchen and bathroom sink drains.
