Quarterback 4FT LED Shop Light 40W Low Heat Output for Basement and Laundry Room 5000K Daylight
Quarterback 4FT LED Shop Light 40W Low Heat Output for Basement and Laundry Room 5000K Daylight
Couldn't load pickup availability
Why you'll love it
- 4,000 lumens of 5000K daylight output makes fine details and small parts clearly visible, reducing eye strain during long projects
- Only 40W of power draw noticeably cuts electricity costs compared to traditional fluorescent shop lights
- Inline switch means no electrician or wall-switch rewiring is required to install and operate
- 50,000-hour rated lifespan plus a 5-year limited warranty removes the hassle and cost of frequent bulb replacement
- Slim 1.42-inch wide housing fits in tight ceiling spaces where bulky fluorescent fixtures won't
- Flexible mounting—surface-mount or hook-hang—lets the same light serve a fixed garage ceiling or a portable workbench setup
Perfect for
- Bright overhead task lighting while working on cars, wood projects, or mechanical repairs in the garage
- Replacing dim or failing fluorescent tube fixtures in a basement or shop with a slimmer, longer-lasting LED
- Hanging from ceiling hooks to illuminate a specific workbench or project area without hardwiring
- Lighting a finished basement, laundry room, or utility space where no overhead fixture currently exists
- Providing daylight-quality illumination for detail-oriented hobbies like model building, crafting, or electronics work
4FT LED Shop Light
Product Information
ENERGY EFFICIENT: Provides bright light while consuming only 40W. Benefit from reduced electricity bills and lower carbon footprint EASY TO USE: The 4FT LED Shop Light comes with an easy-to-use Inline which lets you turn it on and off without the hassle of a wall switch SUPERIOR ILLUMINATION: With a color temperature of 5000K, this LED Shop Light provides bright, clear, and natural daylight-like illumination that is perfect for any work area CERTIFIED SAFETY: FCC certified for quality and safety, with a long-lasting 50,000-hour lifespan and backed by a 5-year limited warranty for peace of mind SIMPLE INSTALLATION: Our shop light can be easily mounted onto any surface or hung from its hooks. Whether you need overhead lighting or task-specific illumination, our shop light has got you covered
Brand Quarterback Item Weight 14.88 ounces Style Industrial Voltage 120 Volts Brightness 4000 Lumen Light Source Wattage 40 Watts Mounting Type Ceiling Mount Color Temperature 5000 Kelvin Specification Met FCC Number of Light Sources 4 Product Dimensions 46"L x 1.42"W x 1.65"H Light Output Maximum 4000 Lumens Manufacturer Boost Lighting, Inc. UPC 850025282987 Wattage 40 watts Part Number SL46GBLK50S1 Item Weight 14.9 ounces Item model number SL46GBLK50S1 Item Package Quantity 1 Finish types Powder Coated Included Components Mounting Hardware Specific Uses Garage, Home, Shop Special Features Adjustable Height, Energy Efficient, Lightweight Switch Style Inline Switch Batteries Required? No Wattage 40 Watts
Frequently Asked Questions
Does the FCC certified driver protect my home workshop electrical from interference or overload?
Yes. The FCC certification means the internal driver meets federal limits for electromagnetic interference, which matters in a workshop with radios, battery chargers, and other electronics running on the same circuit. It also indicates the driver has been tested for electrical safety, so it is appropriate for permanent residential use in a garage or basement.
Is the aluminum housing safe to mount near insulation or in a basement ceiling?
Yes. The powder-coated aluminum housing runs cool compared to fluorescent ballasts and incandescent shop bulbs, and it does not require the clearance around insulation that older high-heat fixtures sometimes need. It is safe for typical basement joist bays and garage ceiling installations where building code allows low-profile LED fixtures.
Will this light overheat if I leave it on for a full day of car repair work?
No. LEDs convert most of their energy into light rather than heat, so the housing stays cool to the touch during extended use. The integrated driver is rated for continuous operation, and there is no glass tube or hot filament that can crack, shatter, or cause burns the way an old fluorescent or halogen shop light could.
Is this safe to use around kids and pets who might be in the garage?
Yes. There is no glass envelope to shatter, no hot bulb surface to touch, and no open flame. The slim aluminum housing stays cool even after hours of use, so accidental contact during a project is far less of a burn risk than a halogen work light or an old incandescent garage bulb.
Does the 50,000-hour lifespan mean I will not have to climb up and replace bulbs in risky positions?
Correct. The integrated LED strip is rated for 50,000 hours, which for most home users means 10-plus years of typical use. That removes the ladder-and-bulb replacement cycle that comes with fluorescent tubes, which often break in the fixture and require partial disassembly to clean up safely.
Is this light safer to leave on unattended in a basement or utility room than a fluorescent fixture?
Yes. Fluorescent fixtures contain a ballast that can overheat, and the tubes can crack and drop glass. The integrated LED has no ballast, no glass tube, and no high-voltage starter. The cool-running aluminum housing and sealed driver make it a safer choice for spaces like utility rooms and basements where lights may be left on for hours.
Can I install this myself without hiring an electrician?
Yes. The fixture is a plug-in LED strip with a standard 120V cord, so installation is a screwdriver task, not a wiring task. That removes the need to work inside a live electrical box on a ladder, which is one of the more common causes of home workshop electrical injuries.
How does an integrated LED shop light compare to a fluorescent tube fixture for home safety?
Integrated LED fixtures eliminate the mercury-containing glass tubes, the buzzing ballasts, and the slow warm-up that makes fluorescent shop lights flicker in cold weather. There is no tube to crack, no ballast to overheat, and no starter to fail, which is why many homeowners replace fluorescent shop lights specifically to remove those failure points from their garage or basement.
Is the powder-coated finish safe if it gets scratched during installation?
Yes. Powder coating is a dry-finish process that bonds to the aluminum as a cured film, so normal scratches during mounting do not release hazardous material. The aluminum itself is non-sparking and corrosion-resistant, which is appropriate for garage and basement environments with humidity and concrete dust.
Can I mount this near a smoke detector or sprinkler head without triggering it?
In most residential installations, yes. The fixture produces light, not heat, and the housing runs cool enough that it will not activate a residential smoke detector. As with any ceiling fixture, follow local building code for spacing near sprinkler heads, but the low profile and cool operation make it compatible with typical garage and basement layouts.
I am worried about electrical fires in my attached garage — is a 40W plug-in LED actually a safer choice?
Yes. A 40W LED draws less current than a 90W fluorescent shop light, which reduces load on the garage circuit. The integrated driver has built-in overcurrent and thermal protection, and there is no in-fixture ballast, the most common failure point in older fluorescent shop lights and a known source of garage electrical fires.
What happens if the power cord gets pinched or cut while the light is on?
Like any 120V corded appliance, a damaged cord is a hazard and should be replaced before further use. However, the integrated LED driver is designed to shut down safely under fault conditions, and the housing is not a fire risk the way an overheated ballast can be. The cord should be routed away from work areas, lift arms, and door tracks to prevent damage in the first place.
Is the inline switch safe to operate with greasy or wet hands?
The inline switch is a sealed rocker-style switch rated for normal workshop conditions. Like any electrical switch, it should not be operated with standing water on the hands, but occasional contact with shop residue is normal use. For added safety in a damp basement, plug the fixture into a GFCI-protected outlet as required by code for unfinished spaces.
I have had cheap shop lights fail and scorch the ceiling — how do I know this one will not?
The fixture uses an FCC certified constant-current driver, a powder-coated aluminum housing, and an integrated LED with no replaceable bulb to overheat. The 5-year limited warranty and 50,000-hour rating are backed by a manufacturer that has shipped millions of these fixtures, and the design eliminates the ballast and tube combination that causes most ceiling-scorch incidents in older shop lights.
How do I install this 4FT LED shop light in my garage or basement?
Choose either surface mount or hook hang. For surface mount, mark two screw locations on the ceiling joist 42 to 44 inches apart, drive the included screws into the joist leaving the head exposed, and slide the fixture's keyhole slots over the screw heads. For hook hang, screw two ceiling hooks into the joist and hang the fixture from the two integrated mounting tabs on the housing. Plug the cord into a 120V outlet and flip the inline switch. The whole process takes about 5 to 10 minutes with a drill and a ladder.
What is the best height to mount this shop light for a workbench?
For a single workbench or project table, the fixture works best 24 to 48 inches above the work surface, which gives you an even pool of light without harsh glare. For full-room garage lighting, mount it as close to the ceiling as your garage door travel allows, typically 7 to 8 feet, so the spread is as wide as possible.
Can I link multiple fixtures together or daisy-chain them?
This model is a single-circuit plug-in fixture and does not have a built-in linkable connector on the housing. To run multiple strips from one switch, use a power strip, a splitter, or a switched outlet. Many home workshop owners run two or three strips on a single smart plug so the whole bay turns on together.
Does this light work with a 220V or international outlet?
The standard model is designed for North American 120V, 60Hz outlets and ships with a standard NEMA 5-15 plug. For 220 to 240V use, a step-down transformer rated for at least 50W continuous load is required, and the inline switch and FCC certified driver are rated for the input range listed on the fixture label.
Will this fixture fit between my garage door tracks and ceiling joists?
The housing is 1.65 inches tall and 1.42 inches wide, which fits in most standard garage ceiling cavities. For low-clearance garages with a torsion bar close to the ceiling, measure the gap between the door tracks and the ceiling before mounting. Surface mount typically fits where a fluorescent strip would not, because the integrated LED is slimmer than a fluorescent tube housing.
What is included in the box, and what do I need to buy separately?
The box includes the 4FT integrated LED fixture, the power cord with inline switch, two surface-mount screws, two drywall anchors, and a printed quick-start guide. You will need a drill or screwdriver, a ladder, and optionally two ceiling hooks if you choose the hook-hang mounting method. No bulbs, ballasts, or additional wiring parts are required.
Is this LED shop light safe to leave on 24/7 in a basement or utility room?
The integrated LED and FCC certified driver are rated for continuous operation, and the 50,000-hour lifespan is calculated against constant-on use cases like security lighting, utility rooms, and basement storage areas. That said, no fixture should be left on unattended indefinitely without periodic visual inspection of the cord, plug, and housing.
What should I do if the light flickers, buzzes, or stops working during the warranty period?
First, check that the plug is fully seated in the outlet and that the inline switch is firmly in the on position. If the issue persists, unplug the fixture and contact the manufacturer's customer support with your order information. The 5-year limited warranty covers defects in materials and workmanship, including driver failure, LED failure, and switch failure under normal residential use.
How does an LED shop light differ from an LED utility light, a wraparound, or a strip light?
An LED shop light is specifically designed for task environments like garages, basements, and workshops, with high lumen output, a 5000K daylight color, and flexible mounting. A wraparound is a residential-style 4-foot fixture meant for kitchens and laundry rooms with a softer 3500K to 4000K output and a flatter lens. A strip light is a smaller, often linkable residential fixture under 2,000 lumens. For 4,000 lumen task output in a garage or workshop, an LED shop light is the right category, and a wraparound or strip light is usually too dim for the space.
