XHF Low Profile Cable Clips Squares – Safer Garage, Workshop and Home Wiring to Reduce Trip Hazards and Loose Cords
XHF Low Profile Cable Clips Squares – Safer Garage, Workshop and Home Wiring to Reduce Trip Hazards and Loose Cords
Couldn't load pickup availability
Why you'll love it
- No-drill, tool-free installation via 3M peel-and-stick adhesive saves time and avoids wall damage
- Dual mounting options (adhesive OR included screws) let users choose the right hold strength per surface
- UV-protected nylon holds up to sunlight and weather for reliable outdoor lighting displays
- Bulk 100–200 piece kits cover whole-home or vehicle projects in a single purchase
- Discreet black or white color options blend with walls, trim, and surfaces for a clean look
- PA66 nylon construction is tougher and more heat-resistant than generic plastic mounts
Perfect for
- Tidying TV and home theater cables along baseboards and behind entertainment centers
- Mounting Christmas lights and string lights on outdoor eaves and patio rails
- Routing computer, USB, and charging cables under desks and workstations
- Securing automotive wiring and aftermarket accessory cables inside vehicles
- Anchoring lightweight furniture to walls as a tip-prevention safety measure
100 Pack
High quality UV resistant nylon zip tie mounts can help you even outdoors. With a strong self-adhesive back, stable to help you fix the base.
100 Pack
We match you with 8 " Industrial grade nylon zip ties. Strong, flexible, with industrial grade strength, strong UV resistance, suitable for multiple projects.
100 Pack
We will prepare spare self tapping screws for you in the package, so that you can apply them on the rough surface or the surface where glue is difficult to stick. We want to make sure our products are available to you everywhere.
Suggestions on the use of cable tie mounts:
Clean Use Environment
Before using self-adhesive mounting, make sure that the surface to be pasted is free of dust or other impurities, and ensure the surface is smooth, so that the glue adhesion can play the greatest role.
Tear Off The Backing Paper Cleanly
Try to grasp a small corner of mounts, and avoid touching the gum with fingers after tearing, so as to ensure that the gum is clean.
Press and Wait Properly
When you stick the mounts on the surface of the object, press it with appropriate force for about 10 seconds. Hang or bind the object 12 hours after fixation. The purpose of this is to make the back glue fully integrate with the contact surface, increase the viscosity and prolong the service life.
Screws Where Necessary
When you encounter an object that is difficult to stick, you can use screws to fix the base 100%.
Product Information
High quality material：XHF Adhesive Zip Tie Mounts are manufactured from 3M Strong Adhesive and PA66 nylon. Wire tie downs without tools. Simply peel off the backing paper command strip place firmly on a clean, dust-free surface for best adhesion. Anti-Tip furniture anchors,suitable for cars, house and office, can be applied to various cables such as computer cables, TV cables, Christmas lights cable, USB cables and so on Note: Clean the surface of the dust before use,glue is best to be glued once and should not be disassembled repeatedly. After applying self-adhesive glue, it should be used 24 hours apart. 100pcs Cable tie mounting/100PCS 8" zip ties/100PCS Screws.
Technical Details Material Nylon Color Black Brand XHF Item Length 8 Inches Style Zip Maximum Diameter 8 Inches Number of Pieces 300 Manufacturer XHF UPC 738629963108 Part Number LJJ-22FR4-27 Item Weight 6.7 ounces Item model number LJJ-22FR4-27 Size 100 Piece Item Package Quantity 1 Batteries Included? No Batteries Required? No
Frequently Asked Questions
Can I use these mounts to anchor a lightweight dresser to the wall for tip over prevention?
Yes. XHF cable tie mounts with the included screws can be used to secure anti-tip straps or furniture safety straps to the wall, providing a low profile anchor point for dressers, bookshelves, and entertainment centers in homes with small children.
Are these safe to use in a nursery or kid's bedroom around little hands?
Yes. The mounts sit flat against the wall or furniture, and once zip ties are trimmed flush there are no sharp edges or small loose parts for a child to pull on. They are a popular choice for routing baby monitor cords, sound machine cables, and nightlight wires out of reach.
Will the zip ties hold up to a pet that likes to chew on cables?
Bundling cables tight against the wall with XHF mounts and zip ties removes the slack that most pets target. For persistent chewers, the included screws let you mount the cable run into a baseboard or behind furniture where it is fully inaccessible.
Are these mounts fire safe, and do they hold up near heating vents or radiators?
The PA66 nylon used in XHF mounts has a higher heat resistance rating than standard plastic cable clips, making them suitable for use near heating vents, baseboard heaters, and home theater equipment that generates warmth during long viewing sessions.
Can I use these to secure automotive wiring so it does not interfere with driving?
Yes. XHF mounts are widely used in car interiors, trunks, and engine bays to secure aftermarket accessory wiring, LED strips, and stereo cables away from pedals, moving parts, and hot engine components, which is a key vehicle safety improvement.
Will this help me keep cables off the floor so my toddler does not trip?
Absolutely. By routing lamp cords, charger cables, and TV wires along baseboards and behind furniture with XHF mounts, you eliminate the floor level loops that are the most common cause of toddler tripping accidents at home.
Is this a safer alternative to nails and staples for securing cords in a child friendly home?
Yes. Nails and staples leave sharp points and can puncture cable insulation, creating an electrical hazard. XHF adhesive and screw mounted cable ties hold cords securely with no exposed metal near the wire jacket, which is a much safer approach in homes with kids and pets.
Can I use these to secure a car seat base or child seat anchor strap?
XHF cable tie mounts are designed for low voltage wiring, USB cables, and lightweight accessory cords, not for the high load child seat anchor points that are built into your vehicle. For car seat safety, always use the factory anchor system and consult your vehicle owner manual.
How does this compare to taped down cables for a quick child proofing fix?
Tape leaves sticky residue, fails on carpet, and is a choking hazard if peeled off by a child. XHF adhesive mounts with zip ties provide a clean, secure, long-term cable management solution that does not introduce new safety risks in a child friendly home.
Will the adhesive fail over time and drop a heavy cable onto a walkway?
On properly prepared surfaces, the 3M adhesive is rated for long-term hold, and the PA66 body adds mechanical strength. For heavy cables in high traffic areas, use the included screw mounted version for an extra layer of safety and peace of mind.
Are these safe to use inside a closed cabinet with a hot power strip?
Yes. The PA66 nylon is rated for higher heat resistance than standard plastic, so XHF mounts are well suited for routing power strip and adapter cables inside media cabinets and AV closets where heat can build up during extended use.
How do I install XHF adhesive cable tie mounts on a smooth surface?
Clean the surface with isopropyl alcohol and let it dry completely. Peel the red backing film off the 3M adhesive pad, press the mount firmly onto the surface for 10 to 15 seconds, then wait 24 hours for the adhesive to fully cure before loading it with cables and zip ties.
Can I use the included screws instead of the adhesive?
Yes. Every XHF pack includes matching screws for optional mechanical fastening. Pre drill a small pilot hole if you are mounting into hard wood or masonry, then drive the screw through the center of the mount until it sits flush against the surface.
How much weight can each cable tie mount hold?
On a properly prepared smooth indoor surface, each 3/4 inch mount comfortably supports the weight of a small bundle of low voltage cables like HDMI, USB, lamp cords, and string light wiring. For heavier loads, long spans, or rough outdoor surfaces, use the screw mounted version and space the mounts closer together.
What size zip ties fit these mounts, and can I reuse my own?
The included zip ties are 8 inches long, which fits the square opening of the 3/4 inch mount. Any standard width zip tie up to about 0.2 inches wide will also fit, so you can use your own longer or colored ties if you prefer.
Do these work on glass, metal, plastic, and painted drywall?
Yes. The 3M adhesive is formulated to bond to smooth, non porous surfaces including glass, metal, sealed wood, plastic, and painted drywall. For porous surfaces like brick, concrete, stucco, or unfinished wood, use the included screws for a secure hold.
What is included in the XHF 100 piece and 200 piece kits?
Each kit includes the selected count of 3/4 inch XHF cable tie mount squares in your choice of black or white, a matching count of 8 inch zip ties, and a set of mounting screws for optional screw installation on rough or load bearing surfaces.
Is the adhesive safe to use on freshly painted walls?
Wait at least 7 to 14 days after painting for the paint to fully cure before applying the 3M adhesive. Applying adhesive to fresh paint can cause the paint to lift when the mount is removed later, which is the most common cause of wall damage with any adhesive cable mount.
Will these mounts hold up in a hot garage or attic?
Yes. The PA66 nylon body is rated for higher heat resistance than generic plastic cable clips, and the 3M adhesive maintains its bond across a wide temperature range, making XHF mounts suitable for garages, attics, and utility spaces with elevated temperatures.
What is the difference between adhesive cable mounts and cable raceways?
Adhesive cable mounts like XHF are small individual squares that hold a bundled cable run flat against a surface, which is discreet and flexible. Cable raceways are rigid plastic channels that fully enclose cables. Mounts are best for clean, low profile installs where you want the cable to follow the room, while raceways are best when you need a fully enclosed protective channel.
